· SINGLE END OR DOUBLE END SHUT OFF Quick Clip couplings are available in single end shut-off providing a maximum flow tubing connection; and a double end shut-off providing a sealed system without extra valving. Fluid and gas flow is positively stopped on both sides of the connection with the double end shut off design, eliminating the fluid leaks, system contaminations, and vacuum loss. · SPACE SAVING -- ATTRACTIVE Quik Clip couplings extend a minimal distance from the panel face in the coupled position. Short bulkhead tube to tube couplings reduce internal connecting space requirements. The attractive design enhances any panel face appearance. · EASY CONNECT·DISCONNECT Quik Clip couplings are easily disconnected by pressing the Quik Clip down for instant separation. Connection is automatically locked and completed by simply inserting the tube end into the panel side of the coupling. One hand operation, no extra pressure required, no questionable open or closed connections make the Quik Clip coupling applicable to all tubing connections requiring frequent disconnecting. · FULLSWIVEL GRA-TEC fittings allow the tubing to swivel freely, even under pressure there is never any kinking or binding to damage tubing or interrupt performance of the system. · AVAILABLE IN WIDE VARIETY OF STYLES Tube to tube and tube to pipe couplings are available in single end and double end shutoff. Special O'Ring seal materials are available on special order, and special tubing connections are available on request. · GRA-TEC "NO FERRULE" POLY TUBE CONNECTION All polytube, nylon, and other flexible tubing is reliably held by GRA- TEC's exclusive "No Ferrule" poly fitting. Increased flow area and improved gripping capability are "No Ferrule" advantages compared to conventional plastic ferruled polytube fittings. Easily assembled. the "No Ferrule" fittings is reusable with all types of tubing.

The full range of plastic quick disconnects provide alightweight, attractive appearance and are resistant to many chemicals. FDA approved materials available upon request. Panel mounting creates a neat attractive package for your instrumentation panel. Variations in mounts can be provided to fit your specific application.

SIZE RANGE:	Pipe Threads: 118 " to 318 " NPT Tubing Connections: 1116" to 3/8" Flow Sizes: 118" and 114"
MATERIALS:	Plastic Coupling - Acetal Delrino or Celcono (special materials upon request) Internal Valves - Acetal Delrino or Celcon" (special materials upon request) O-Rings - Buna-N Seals (special materials upon request) Latch Clip - Stainless Steel with Chrome Plate Springs - Stainless Steel Chrome Plated Brass Coupling - Chrome Plated Brass Internal Valves - Acetal Delrin" or Celcon" (special materials upon request) O-Rings - Buna-N Seals (special materials upon request) Latch Clip - Stainless Steel with Chrome Plate Springs - Stainless Steel Stainless Steel (Consult Factory)
OPERATING TEMPERATURE:	Plastic - 180F (82C) Chrome Plated Brass - 180F (82C)
WORKING PRESSURE:	Plastic 120 psi Chrome Plated Brass 250 psi
VACUUM:	Connected -27"Hg Disconnected - Contact Factory
PORT CONNECTION:	1/2", 11/16" Bulkhead 1/8", 1/4", 3/8" Pipe Thread "R" Drill Press-Fit (eliminates pipe threads)
COMPATIBLE TUBING:	Polyethylene, Polypropolene, Nylon, Polyvinyl Chloride, Polyallomer