GRA-TEC
DIMENSIONAL DATA - RETAINER CLIPS
Home Previous Page Next Page Catalog Index Talk To Us                                        Phone: 603-329-9633     Fax:  603-329-4633

GRA-TEC PROVIDES 3 FORMS OF RETAINER CLIPS

With GRA-TEC's fitting system you can connect and disconnect in a fraction of the time required by conventional systems.

GRA-TEC's fittings snap together, eliminating problems with wrenches, tubing orientation, stripped threads and breakage.

Flat Retainer
Clip

Stainless Steel

1500 PSIG 


System    Part Number
______________________
 1/16       1900     
 1/8        1901
 1/4        1902
 3/8       *1903
 1/2       *1904
Wire Retainer
Clip

Stainless Steel

250 PSIG 

                       
System    Part Number
______________________
 1/8        1801
 1/4        1802
Flat Retainer
Captive Clip
"GRA-LOK"

Stainless Steel

2500 PSIG 


System    Part Number
______________________
 1/8        1913
 1/4        1912


GRA-LOK clips are assembled in female components at the 
factory and are compatible to all 1/8" - 1/4" flat clip 
connectors, add "G" to part number, i.e. 2758G.
GRA-LOK
45 Degree
Adapter 
                       
                	           
System    NPT    Part Number     A       B      C      D
___________________________________________________________
 1/4      1/8      90490       1.187   .750   .228   .787


The GRA-LOK clip can be installed in any flat clip connector block to build unions,
tees, elbows, and crosses
GRA-LOK
Female Gra-Tec
to
Male NPT 
                       
                	           
System    NPT    Part Number     A       B      C      D
___________________________________________________________
 1/8      1/8      2754G        .850   .450   .187   .750
 1/4      1/8      2757G        .850   .450   .187   .875
 1/4      1/4      2758G       1.040   .450   .250   .875


The GRA-LOK clip can be installed in any flat clip connector block to build unions,
tees, elbows, and crosses
GRA-LOK
2-Port
Female
Connector 
                       
                	           
System    NPT    Part Number      A      B      C      D
___________________________________________________________
 1/8      1/8      2701G        .687   .500   .343   .562
 1/4      1/4      2702G        .750   .500   .406   .375


Note:  Part number 2702G is round configuration

The GRA-LOK clip can be installed in any flat clip connector block to build unions,
tees, elbows, and crosses
Non-Rotating
Adapter 
  
           	           
Part Number                 Description
_______________________________________________________
  2101NR        1/8" male GRA-TEC x 1/8" male GRA-TEC
  2105NR        1/4" male GRA-TEC x 1/4" male GRA-TEC
  2108NR        3/8" male GRA-TEC x 3/8" male GRA-TEC
  2201NR        1/8" male GRA-TEC x 1/8" male pipe
  2206NR        1/4" male GRA-TEC x 1/4" male pipe
  2211NR        3/8" male GRA-TEC x 3/8" male pipe

For use on systems where components must maintain proper orientation without
auxiliary mounting.

All standard GRA-TEC fittings permit 360 degree orientation when connected.
The following GRA-TEC fittings are also available with a non-rotating feature.
Minimum order quantity is 50 for any part number.

For Higher Pressure or Spring Loaded Variations, Consult Factory